532nm Lasers

Lasers

For ordering please see

'How To Order'

Please see our full range of laser safety eye wear to accompany all lasers on our Website. 

Pulsed 532nm Lasers

STANDA 532nm Diode Pumped Nd:YAG Solid State Micro-Laser
ST-01-SH

 

 

 

 

 

 

 

 

This range of lasers from Standa offer 532 nm nanosecond pulsed output, with a range of average output powers between 20 mW and 50 mW.

  • TEM00 and pulsed spectral structure SLM

  • Applications:

    • Pump source for harmonic generators,

    • optical parametric oscillators and amplifiers  (using periodically poled KTP or LiNbO3 crystals

  • Low-coherence "white light" interferometry

  • Test and measurement systems

  • Optical coherence tomography

  • Two-photon microscopy

  • Fluorescence microscopy

 

CW 532nm Lasers

STANDA 532nm Diode Pumped Nd:LSB Solid-State Micro Laser
ST-01-SHCW

 

 

 

 

 

 

 

 

  • The STA-01CW Microchip Laser is a highly reliable CW diode-pumped solid-state laser operating at the fundamental 1064 nm and second harmonic 532 nm wavelength.

  • The laser head delivers 0-500 mW of stable output power in a TEM00 beam.

  • Laser resonators does not contain moving parts; optimized laser diode (LD) beam shaping optics allows easy and reliable assembling.

  • Standard laser system consists of a power supply unit and a laser head.

  • Power supply unit includes LD and TEC drivers, USB interface for ease of integration and remote control.

  • JLV-SOFT9, universal laser control software with intuitive GIU, allows detailed setting and monitoring of the laser parameters.

  • The STA-01CW is equiped with a Remote Interlock connector located at the back panel.

  • Each unit is supplied with a shorting device installed in the interlock connector.

 

STANDA 532nm Microchip Laser
ST-02-SHCW

 

 

 

 

 

 

 

 

  • The STA-02-SH-CW Microchip Laser is a CW diode-pumped solid-state laser operating at the wavelength 532 nm.

  • The laser head delivers 20 ± 1 mW of stable output power in a TEM00 beam.

  • Laser resonator does not contain moving parts; optimized laser diode (LD) beam shaping optics allows easy and reliable assembling.

  • Standard laser system consists of 12STAD-CW digital controller and a laser head.

  • Controller includes LD and TEC drivers, output power stabilization system, USB interface for ease of integration and remote control.

  • JLV-SOFT9, universal laser control software with intuitive GUI, allows detailed setting and monitoring of key laser parameters along with writing them to an EEPROM located inside laser head.

  • The last feature enables the interchangeability of laser head STA-02-SH-CW and 12STAD-CW controller.

  • Several LEDs located at the front panel indicate DC power, laser diode enabling and stable output power. The 12STAD-CW is equipped with a Remote Interlock connector located at the back panel and the corresponding LED at the front panel indicating the Interlock status.

  • Each unit is supplied with a shorting device installed in the interlock connector.

  • Laser head output power can be set by manufacturer from 10 mW to 30 mW as agreed with the customer.

STANDA 532nm Scherzo & Symphony Lasers
ST-02-SHCW

  • Scherzo series offers pitch perfect locked single frequency laser light with outputs ranging from 50 mW up to 300 mW.

  • The unique laser platform allows one to reach the much higher SHG conversion efficiency if compared to the standard architectures.

  • Thanks to the unique technology the fundamental and the second harmonic cavities are also tuned to maximize 1064nm light generation, therefore much smaller and less expensive pump diodes can be used.

  • Symphony series offers pitch perfect locked single frequency laser light with outputs ranging from 50 mW up to 300 mW.

  • The unique laser platform allows one to reach the much higher SHG conversion efficiency if compared to the standard architectures.

  • Thanks to the unique technology the fundamental and the second harmonic cavities are also tuned to maximize 1064nm light generation, therefore much smaller and less expensive pump diodes can be used.

Laser Support Services Ltd., 1990-2020

Free, no obligation quotes. Always.

Laser Support Services
School Drive
Ovenstone
Fife
KY10 2RR

  • Twitter Social Icon
  • LinkedIn Social Icon
  • Facebook Social Icon

Reg Co: SC126831

VAT No: GB 561 5209 55

Tel: +44 (0) 1333 311938   -   Fax: +44 (0) 1333 312703   -   enquiries@laser-support.co.uk   -   www.laser-support.co.uk