Tel: +44 (0) 1333 311938 - Fax: +44 (0) 1333 312703 - enquiries@laser-support.co.uk - www.laser-support.co.uk
Opto-mechanic Components
Carriers
ST-2RC01-25
Aluminium rail carriers
Push the lever of the clip to release and to move, or to lift the carrier. To stop the carrier firmly, use the fixing screw. Rather than grinding against, and damaging the rail with its tip, the screw gently clamps to the rail on the wide tenon of the clip. The clip is preloaded by a spring. Its lever is removable (on a thread).
-
Weight: 0.05kg
-
Two locking options
-
by integrated spring clip
-
by a fixing screw
-
-
Quick and easy sliding
-
Material: black anodized aluminium
-
Used with Aluminium Optical Rails
£POA
ST-2RC6-50
Steel rail carriers
View drawings.
This rail carrier, the ST-2RC6-50 may be quickly lifted and set again on a rail. The carrier can also be slid on to any point on the rail and secured with a fixing screw. It compromises M6 and Ø6.4 mm mounting holes to aid in fastening other units. The ST-2RC6-50 may be used as a reference for repeated positioning. This rail carrier is made of black finished hardened steel and can be used with Used with steel optical rails.
£POA
ST-2RC19
Optical rail accessory
Picture shows ST-2RC19-25
-
Essential Carriers for Optical Rail Setups
-
Compact Dovetail design
-
Precision Machined dovetail clamps
-
Black anodized aluminium
-
Used with Optical Rails
-
Available as:
-
ST-2RC19-25 (25mm width)
-
ST-2RC19-50 (50mm width)
-
£POA
ST-2RC01-50
Aluminium rail carriers
View drawings.
Push the lever of the clip to release and to move, or to lift the carrier. To stop the carrier firmly, use the fixing screw. Rather than grinding against, and damaging the rail with its tip, the screw gently clamps to the rail on the wide tenon of the clip. The clip is preloaded by a spring. Its lever is removable (on a thread).
-
Weight: 0.09kg
-
Two locking options
-
by integrated spring clip
-
by a fixing screw
-
-
Quick and easy sliding
-
Material: black anodized aluminium
-
Used with Aluminium Optical Rails
£POA
ST-2RC6-50H
Steel rail carriers
View drawings.
This rail carrier has a Ø18mm clear aperture. This unit may be reinserted exactly into the same position next to the reference carrier. This rail carrier is made of black finished hardened steel and can be used with Used with steel optical rails.
£POA
ST-2RC6-25
Steel rail carriers
This rail carrier, the ST-2RC6-25 may be quickly lifted and set again on a rail. The carrier can also be slid on to any point on the rail and secured with a fixing screw. It compromises M6 and Ø6.4 mm mounting holes to aid in fastening other units. The ST-2RC6-25 may be used as a reference for repeated positioning. This rail carrier is made of black finished hardened steel and can be used with Used with steel optical rails.
£POA
ST-2SRC6-50
Steel sliding rail carrier
This sliding rail carrier, the ST-2SRC6-50 is a universal platform, which has additional upper rails orthogonal to lower base rails. The Carrier allows the attachment of any unit of ST-10ORS6 system on the rail ST-2OR6, to move it easily along the optical rail and to fix it within ±15mm. The carrier has a pattern of M6 and Ø6.4 mounting holes. This sliding rail carrier is made of black finished hardened steel and is used with steel optical rails.
£POA
